Front Grill by MAX-5

[12/19/2000] Reviewed by: Bruce Rosen -

Applicable to: '90 - '97 1.6 liter 1.8 liter

Front grill. Powder coated metal mesh with plastic edge guard.

Purchased product from PBC. To install you simply remove two easily accessable bolts, slide grill into place and reinstall the two bolts. As sent grill had a small part of the mesh sticking up into the area where the bolt had to go. It was easily bent out of the way with needle nose pliers. Bolt then slipped right into place with the large flat washer on the bolt going over the grill mesh to hold it in place.

Product appears to be of good quality, with even paint and properly installed plastic edging. It slide into place easily and could almost be installed without even using the bolts to hold it in place.

Under 5 minutes to remove

Back to Product Reviews 14 January, 2001