BR Performance Machined Aluminum Race Pedals

[3/27/2002] Reviewed by: Joe Hedrick -

Applicable to: '90 - '97 1.6 liter 1.8 liter

Machined aluminum race pedals (pedal covers really) with the stylized M logo.

Machining marks are visible on the surface of pedals but not really noticeable once installed. Installation is a bit of a pain as you must drill the pedals (not the product but the actual Miata pedals). Remove the cover from the underside of the steering column as this will give you a little more room to work. I found it easiest to sit on the ground with my legs under the car for the installation (might be tight if you've lowered your car at all). Otherwise pretty easy install (drill the pilot holes as suggested in the instructions). Can be removed very quickly and the OEM rubber covers reinstalled leaving only two small drill holes in the gas pedal.

Look great IMHO. The shine in the foot well adds a nice bit of flash to an otherwise dark hole.

Under 5 minutes to remove

Back to Product Reviews 23 April, 2002