Applicable to: '90 - '97 '99 + 1.6 liter 1.8 liter
Stainless Steel hydraulic clutch line sold by Dealer Alternative
I was hoping it would lessen the typical Miata clutch drag- but no luck there. Additionally, there is a hex shaped cutout on the metal brackets on the passenger side of the firewall. This is to engage the hex nut on the clutch line to hold it in place while you tighten the nut on the other side. The hex nut on the FM clutch line is too big to fit into this metal bracket! I just tightened it the best I can- but it's an crooked fit.
I do not recommend this product because of the fitting issues mentioned
Difficult to remove without leaving damage
| Back to Product Reviews | 15 December, 2001 |