Moss Miata

Hot stuff from 2006


Hot stuff from earlier years


Good-Win Racing is proud to introduce its RoadsterSport Performance Midpipe for 2006 through 2007 MX5 Miatas. This highflow midpipe gains 5 to 8 Ft/Lbs of torque from 3500 through 6000 rpm. (Dyno sheets available at Good-Win Racing forum.)

All stainless steel construction for years of driving pleasure. Slightly larger diameter than stock at 2.5 inches straight through, highflow design with 18 inch resonator and integrated converter and includes two O2 sensor bungs for those adding a performance header in the future.

For more information: Good-Win Racing

(Added 12/30/06)



Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. The billet pedal system from Moss is the ultimate for those of you who want to feel one with the road. Made specifically for the Miata and machined from aircraft quality aluminum, you will enjoy improved feel of the controls and outstanding grip. More experienced drivers will appreciate the ability to "Heel & Toe".

Set includes Accelerator, Brake, Clutch and Footrest pedals.

For more information: www.miatamania.com

(Added 12/16/06)


IL Motorsport worked with one of the leaders in hydraulic lifters world wide to produce this new Chromed Hood Lift for the Mazda MX-5 NC from 2006 and up. The system installs using all existing mounting points, no drilling is required. The lifters themselves are chromed and have a 2 year waranty on them. The resut is superb. The hood lifts with no effort, with the lifters even having a 'slowing' effect as they reaches the fully open position. Strong enough to hold the hood open - even in a strong wind, yet have minimal resistance when closing.

For more information: I.L Motorsport

(Added 12/16/06)



A sportier look is just a spoiler away. Precision molded from fiberglass for a clean fit and smooth finish. Spoiler is supplied ready for prep and paint.

For more information: www.miatamania.com

(Added 12/16/06)


Cobalt Ignition Wire Sets are made precisely for your vehicle, and carry a Lifetime Warranty against defective materials or workmanship! Cobalt Wires feature:

For more information: www.miatamania.com

(Added 12/16/06)


AeroDramatics is proud to offer the 65X subwoofer, designed specifically with your Miata in mind! Need some low frequency thump for your Miata, but don't want to sacrifice a ton of space? There is simply nothing else like the 65X subwoofer! Taking up only .25 cubic feet, and with as much output as some 10" subwoofers and the sound quality to match, its your ticket to sonic nirvana!

For more information: Aerodramatics

(Added 12/11/06)



Good-Win Racing introduces the new Konig FeatherLite alloy wheel for the Miata in both 15x6.5 and 16x7 sizes. Gold or black finish and a clean modern ultra light weight design. Fits all 1990 to 2005 Miatas.

For more information: Good-Win Racing

(Added 11/24/06)



Now in its second decade of production, Mazda's superb convertible roadster has become by far the world's best-selling sports car. Here, in definitive detail, is the full story of the MX-5 Miata (known as the Eunos Roadster in Japan) from inception in the early 1980s to the current third generation models. Researched in Japan, this book includes exclusive interviews with key people in the MX-5 story. Coverage includes development, launch details, the model’s evolution in all the major markets, motorsport, specials, and much, much more. The book also features a foreword by Takao Kijima, MX-5 Miata's Chief Engineer.

For more information: Amazon.com

(Added 11/11/06)



New from 949Racing is the exciting new 6UL 15x8 wheel for 90-05 Miatas. At a super light 12.8 lb, the 6UL was designed specifically for Miata's with +40 offset to get the widest possible tire completely inside the fender.

Available in Silver with machined lip, Black with machined lip, full Nickel paint or full mirror polished (not shown). Being a 4x100 pattern wheel, the 6UL will fit a host of other cars as well. Clearance for BBK, Wilwood 11" rotors and 01+ sport brakes, +20 offset optional.

For more information: 949Racing

(Updated 11/14/06)



Raven Wing Performance is proud to be your Factory Authorized - World Wide - Distributor for FilterMAG™ Products!

Without FilterMAG, thousands of tiny metal particles pass right through your car's oil filter to re-circulate within the oil; damaging critical components and causing engine wear.

FilterMAG attracts the damaging metal particles and traps them within the filter canister. So the oil that returns to your car's engine is cleaner. And cleaner oil, with dramatically reduced abrasive metal particles, means that your car's engine runs smother and LASTS LONGER!

Raven Wing Performance has FilterMAG products for your Miata’s Engine, Transmission, and Differential. FilterMAG products are reusable and come with a 5-year limited warranty.

For more information: Raven Wing Performance

(Added 10/28/06)



Good-Win Racing is proud to introduce its RoadsterSport Race single for 2006 through 2007 MX5 Miatas. Designed for the racers looking to shed maximum weight, this exhaust saves nearly 20 pounds off the stock exhaust. Uses a super high density core to achieve sound reduction sufficient for any SCCA event. Also offers tunable sound level with optional packed baffle insert. All stainless steel with lifetime warranty.

For more information: Good-Win Racing

(Added 10/28/06)



iPod Integration Module 2003-2007 Miata/MX-5

Install directly into the Mazda Modular Radio head unit (iPod not included). Allows you to seamlessly integrate your Apple iPod into your car. Mounts neatly out of sight behind the dash. (iPod is connected/placed in the glove box or console.) Compatible with all iPods containing a 30-pin dock connector. Transfer control of the iPod to the vehicle radio or steering wheel controls (if so equipped.) Charges the iPod battery.

For more information: www.finishlineperformance.com

(Added 10/5/06)


For those of us of average height the Miata fits us pretty good, but any taller than that and it can get a little cramped, especially the leg room. Your right knee is constantly against the center console and it becomes down right uncomfortable, until now. Installing a knee pad in your Miata gives your knee a soft spot to rest. Designed for the 2006 Miata but will fit on most vehicles.

For more information: www.miatamania.com

(Added 10/5/06)


This console armrest pad easily mounts in the cup holder so there is no tape, glue or anything to mess up your console. The pad extends nearly the full length of the console for total comfort. The pad has a high quality textured surface with ribs that match the existing console surface exactly!

For more information: www.miatamania.com

(Added 10/5/06)


The Ultimate hood lift kit by Cobalt has the following features:
Easy Engine Access – Struts mount near cowl so engine is accessible from the sides without needing to reach around the strut as on other kits.

Progressive Struts – Once hood is opened 8” the struts gently lift it to the fully open position. Other kits use inexpensive linear struts that are either too strong or to weak that cause the hood to raise so fast it comes to a shuddering stop at the top stressing all components or requires you to lift the hood all the way open yourself.

For more information: www.miatamania.com

(Added 10/5/06)


This Front and Rear Sway Bar Kit from Moss Motors provides increased steering response and reduced body roll. Kit includes front and rear bars and urethane bushings. The front bar diameter is 25.4mm, the rear bar diameter is 15.88mm, both are hollow. The rear bar is two position adjustable.

For more information: www.miatamania.com

(Added 9/22/06)


Green Performance Filters were first made for and tested by professional racing teams in series like the Le Mans GT and World Rally Championships. The filter material is actually two, cross-woven layers of cotton, which will stand up to multiple cleanings. This can be the last filter you buy for the life of your vehicle! This cotton material is covered with a stainless steel mesh that reacts with the oil in the cotton to produce a positive ionic charge that grabs negatively charged dirt particles. The cotton mesh itself catches particles as small as 5 microns. Free-flowing air translates in your engine to increased horsepower, torque, and better gas mileage. With a Green filter, you’ll know that your engine is getting the biggest, and cleanest, breath of air you can give it.

For more information: www.miatamania.com

(Added 9/22/06)


Headlamp Lid from I.L. Motorsport

This is the ultimatie headlamp lid for the NC MX-5. Fully compatible with all 3rd generation NC Miatas - with or without Xenon lights. Lids come unpainted with all hardware needed for installation.

TÜV approved for Europe.

For more information: I.L Motorsport

(Added 9/16/06)



This Oil Filter Adapter from Moss Motors gets sandwiched between the oil filter and engine boss. It has a place to mount up to 3 sensors. Works with all remote filter kits and oil cooler kits.

For more information: www.miatamania.com

(Added 9/9/06)


ePod Gauge Pod from Moss

For more information: www.miatamania.com

(Added 9/2/06)


The new Cobra inspired rear view mirror from Moss delivers a vintage sports car look. Everything is included to make the conversion from humdrum plastic to polished adjustable mirror in a matter of minutes. Mirror head has normal swivel adjustment and can be lowered and raised on its mounting rod.

For more information: www.miatamania.com

(Added 9/2/06)


Good-Win Racing introduces the new Konig BriteLite 15x6.5 alloy wheel for the Miata. Gorgeous machined wheel face, spokes and deep lip with clear coat for a durable highly reflective finish. Black powder coated spoke sides and inner wheel surfaces for strong contrast and a dramatic look. 38mm offset. Fits all 1990 to 2005 Miatas.

For more information: Good-Win Racing

(Added 9/1/06)



The new Mirror Caps with turn signal indicators from I.L. Motorsport fit all NB Miatas from 1998 through 2005. Available ready-to-paint or in a perfect chrome finish, with turn signals included. Installed, they look like OEM - and not sticked on - a perfect fit and finish! Everything included for an easy, 1 hour installation. Fabricated in ABS plastic.

For more information: I.L Motorsport

(Added 7/13/06)



The goal with the BRP S1 Supercharger was very simple; to create the car they felt that Mazda should have built from the start. This means they had to focus on superior quality, reliability, and fantastic drivability. Through years of development they have managed to exceed their goals in all three areas.

In the end, you'll have a Miata that feels like a V6 was installed from the factory - free from quirks, well mannered, and reliable. Top it all off with nearly unlimited upgrade potential, and you can turn your run-of-the-mill MX-5 into a 300+ HP track monster that will send Ferrari and Porsche owners packing with embarrassment.

For more information: www.stageonetuning.com

(Added 7/13/06)



New for the NC MX-5!

New chrome washer caps fit your third generation MX-5 perfectly! It is a beautifully matched finish with the chrome window frame on the Limited Edition model. 3M double-sided tape is included to install the caps in minutes.

For more information: I.L Motorsport

(Added 7/13/06)



A classic sound backed by real performance is delivered in every Magnaflow cat-back performance exhaust system. Manufactured inside and out from 100% stainless steel and TIG welded for maximum strength. Welds are then smoothed for a premium appearance. This combination provides the best performance along with unmatched value. In fact, Magnaflow is so confident in the quality of its exhaust they back it with a Lifetime Warranty. 99-06 Miata owners will have to cut the stock exhaust pipe. The exhaust system will then slip fit over the cut pipe. On all other systems the exhaust bolts up to the stock flange.

For more information: www.miatamania.com

(Added 6/24/06)


A quick and easy way to fix your Jackson racing supercharger. One of the common problems with the Jackson Racing superchargers for the Miata is that the bypass actuator arm on the supercharger wears out, causing you to lose power and performance from your blower. This simple bolt on bracket reinforces the original actuator arm to help prevent this from happening. If your actuator arm has already worn through, this simple piece installs in minutes getting you back on the road quickly!

For more information: Rspeed, DDMWorks

(Added 5/31/06)



Ultralon - Ultralon is very similar to our Duravent fabric in terms of performance. However, Ultralon is significantly stronger than the Duravent and due to the denseness of the fabric, it folds down to about half the size of most fabrics. Custom fitted to your Miata to ensure a handsome fit and it include scratch free grommets for locking or tying down. Moss' Ultralon cover is suitable for all weather conditions indoors or outdoors in uncovered areas. 5 year warranty.

Duravent - If your Miata is constantly exposed to the elements, the Duravent cover is for you. Water repellant, yet breathable, this cover works indoors and outdoors in virtually any condition. Features include double-stitched seams with neoprene elastic sewn in the front and rear bases for a snug fit, and scratchproof grommets for locking or tying down your cover. This cover has a body-specific fit for easy installation and carries a four-year warranty. Suitable for outdoors in uncovered areas.

Satin Stretch - Stretch Satin covers are for vehicles parked indoors. The material has Lycra fibers that stretch in both directions and the inner liner is the softest fleece available. All stitching is done using a blind stitch, and the fit is so perfect it’s almost sexy.

For more information: www.miatamania.com

(Added 5/12/06)


Clean up the look of your Miata's engine compartment with this stainless steel piece that goes over your spark plug wires.

For more information: www.miatamania.com

(Added 5/12/06)


When you want to keep prying eyes out, but don't want to mess with a huge and expensive car cover, the security cover is the solution. Elastic straps with plastic 'C' clips fasten to strategic points on your Miata to keep the cover firmly and securely in place. In addition to keeping things out of sight, your interior will be cooler and UV protected.

For more information: www.miatamania.com

(Added 5/12/06)


New for the NC MX-5!

Whether you choose Real wood, Real carbon fiber or aluminum, these beautiful dash kits add style to your Miata’s cockpit. State of the art manufacturing techniques allow for the thinnest, most flexible dash kits available giving you a factory installed look. High quality adhesive and UV protection ensure that these kits are a durable and lasting addition.

For more information: www.miatamania.com

(Added 4/30/06)


New for the NC MX-5!

Made in fine PU-RIM Material comes this front spoiler air dam from I.L. Motorsport. Designed specially for the third generation Mazda MX-5 NC from 2006 and later, they are fully TÜV approved and legal all over Europe. Kit includes complete installation instructions and the TÜV Papers required for Europe.

Grill not included and is available seperately.

Installation instructions and additional photos available online at www.ilmotorsport.de.

For more information: I.L Motorsport

(Added 4/30/06)



New for the NC MX-5!

For active Miata owners who need serious seat protection, check out the very affordable Neoprene Seat Covers from Moss Motors. Spills, mud, sand or whatever is easily repelled. Neoprene is a very comfortable fabric that insulates your body from heat or cold and it always has a cool, squishy feel to it. Quickly installed or removed for trouble free machine washing. Available in two tone combinations or solid colors, plus three colors in a popular Hawaiian pattern. Sold in pairs.

For more information: www.miatamania.com

(Added 4/30/06)


DDMWorks introduces their Stage 1 air intake system for 1990-2005 Miata's. The DDMWorks intake replaces your Miata's restrictive air box with a beautiful stainless steel heat shield and free flowing foam filter. With kits starting at only $99 it is a sure way to increase your Miata's performance and stylish under hood looks! Available from the good folks at Rspeed or DDMWorks.

For more information: Rspeed, DDMWorks

(Added 4/30/06)


In 1995 Mazda changed the oil pressure gauge into a go/no-go gauge indicator. By replacing the sender to a voltage signal you can have real oil pressure readings. The Oil Pressure Kit from Moss requires adjusting the pointer on the factory gauge. Kit comes complete with detailed instructions and includes the oil pressure sender, threaded coupling and lead wire.

For more information: www.miatamania.com

(Added 4/30/06)


I.L.Motorsport Ignition Wires are specifically designed for superior performance, reliability and temperature resistance. These 8.0mm wires provide electro-magnetic and radio frequency interference suppression for your MX-5 Miata.These wires are made to specification and utilize Beru connectors - the finest available. 40,000 volts, temperatures up to 500 deg.F, vibrations, salt water, road dust, cleaning agents......these are just a few of the continuous demands to which connectors are subject day-in , day-out. Those wires are special made for all Mazda MX-5 Miata from chassi number 200.000 and up, all cars with 1.8L and seperate ignition coil packs on the cam shaft cover. ( 1 set is 2 wires ).

For more information: I.L Motorsport

(Added 4/23/06)


New for the NC MX-5!

Good-Win Racing introduces their all stainless, fully polished, RoadsterSport Dual Exhaust for the 2006 Mazda MX-5 Miata. This unit wakes up the factory exhaust. Mild at cruise from 3500 to 4500 rpms, it has a nice deep purr when you step on it. A full seven pounds lighter than the stock exhaust it is finished in 3.5 inch tips with baffles that can be removed to change from a sporty sound, to extra sporty. Sound clip available on request.

For more information: Good-Win Racing

(Added 4/20/06)



The Jackson Racing supercharger is a great way to add some power to your Miata. Unfortunately, the superchargers original intake pulls hot air from close to your exhaust header, 30° F or hotter than ambient - not the best thing for making horsepower. The new DDMworks intake encloses a new foam air filter inside a beautiful stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30° and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger will make. The new intake also makes routine cleaning simple and quick - it takes only a few seconds to remove the pod filter.

Available for 1990-2005 Miatas.

For more information: Rspeed, DDMWorks

(Added 3/20/06)


Konig and Good-Win Racing introduce another ultralight alloy wheel for the Miata, the 11.8 pound “Minus” in the 15x6.5 size. Perfect for those looking to run the factory 15 inch tire size of 195/50/15 at the factory 15 inch wheel offset of 40mm. It also works well for those looking to go as wide as a 205/50/15. Made only in black, this new wheel offers the split spoke modern look without the high weight or cost offered in many other choices.

Just $89.

For more information: Good-Win Racing

(Added 3/5/06)



If you've ever seen a sleek, sedan with that oh-so-low street stance and a bulging wheel/ tire combo that just barely tucked under the wheel wells, chances are that car was fitted with H&R TRAK+ wheel spacers. TRAK+ wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you've been looking for.

For more information: www.miatamania.com

(Added 3/5/06)


From ACT and Good-Win Racing comes a less expensive alternative to aluminum flywheels. The new ACT steel “Streetlite” and “ProLite” flywheels provide the same inertia reduction as aluminum flywheels but at lower cost. Moreover, XACT Miata flywheels are certified by ACT to meet SFI Spec. 1.1. This makes the XACT Miata Flywheel legal for competition when SFI Spec. 1.1 is required or recommended. ACT currently manufactures the XACT steel Miata flywheel in two versions for 94-05 Miatas, ProLite (9 Pounds) for road racing and autocross applications and very quick throttle response, and slightly heavier StreetLite (13 Pounds) for street use. Both ProLite and StreetLite Miata flywheels are precision made from Chrome-moly forgings and feature an induction hardened integral ring gear. All ProLite and StreetLite flywheels are CNC machined, heat treated for strength and precision balanced. Substantial material is left behind the clutch surface area for better heat dissipation and durability while weight savings is made where it matters the most for reduced inertia.

For more information: Good-Win Racing

(Added 3/5/06)



The most popular spring in H&R's line-up, Sport Springs will lower your Miata 1.5” front and rear for a lower center of gravity, improved handling and a more aggressive appearance. Sport springs feature more control than that of the OE spring, but is still comfortable for daily use. Sport springs are an excellent choice for street and occasional track use.

Features:

For more information: www.miatamania.com

(Added 3/5/06)


Finally an elegant way for you to install an aftermarket radio in your Miata along with your favorite 2-inch gauges. Made of 304 stainless steel this surround is as strong as it is beautiful. You can order the radio surround with space for 2 gauges, 3 gauges or 2 gauges and the Rspeed Air/Fuel ratio gauge. Add some style and function to your Miata!

For more information: Rspeed, DDMWorks

(Added 3/5/06)


You've modified your Miata, now give it the extra fuel it needs. To make that combination of intake, header, exhaust, cams, headwork, etc. run at peak efficiency, you may need more fuel than the stock ECU can deliver. PowerCard is a unique, load based fuel adder which works with the factory ECU. PowerCard's simple push button interface and powerful load based technology render complex table based throttle position/RPM re-mapping systems a thing of the past.

Just as driving styles differ, no two Miatas are exactly the same. That is why PowerCard is such a powerful and flexible tuning tool. It allows you, the user, to program when and where additional fuel will be delivered. Not emissions legal.

For more information: www.miatamania.com

(Added 2/26/06)


Good-Win Racing introduces the new Version 4 of their famous four wheel big brake conversion for first and second generation Miatas. Version 4 uses four DBA5000 rotors with Alumalite center hats made from light weight aircraft grade aluminum connected to directional slotted rotors with NAS bolts and lock nuts. The rotors use DBA's patented "Kangaroo Paw" ventilation and Thermal Stability Profiling (TSP) Thermo-Graphic paint markings that tell you the peak temperature range you reached on track (which helps you fine tune your pad selection). The AlumaLite hats provide the greatest resistance to distortion for uniform disc expansion and added thermal protection for your bearings. Includes: Wilwood Dynalite Forged 4 Piston Billet Aluminum Calipers in front, matching Stainless lines Front and Rear, Wilwood Q pads for front and Porterfield R4S pads rear, four aluminum hats and four rotors (10.75 inch rear, 11 inch front) fully assembled. Enough thermal capacity for any track Miata or street Miata. Intro price is $1495.

For more information: Good-Win Racing

(Added 2/26/06)



Finally, a hassle free glass window top. Robbins has developed a zipperless design that allows for easy folding so all you have to do is unlatch and go. Available in Vinyl or Sun-Fast cloth with all the features Robbins is famous for. 3 year warranty. Tops do not have a defroster rear window.

For more information: www.miatamania.com

(Added 2/26/06)


Let those SUV’s know you’re there.

Now all years of Miata (MX-5) can easily upgrade their ‘Meep-Meep’ horn to a real Italian dual-tone air horn. This new one-piece compact unit needs no hoses, and thus has no delay, and it’s LOUD!

The kit from Thompson Automotive comes complete with a custom mounting bracket, all mounting hardware and installation instructions. It’s virtually plug & play.

For more information: Thompson Automotive

(Added 2/26/06)



Robbin's Economy Tops use the same quality materials and manufacturing techniques as the "Premium" top line from Moss, what makes them different is a simple design that saves time during the manufacturing process. Please note that Economy tops are not upgradeable to glass windows nor can the plastic windows be replaced.

For more information: www.miatamania.com

(Added 2/26/06)


New for the NC MX-5!

AEM introduces their cold air intake for the 2006 MX5 Miata. The stock Miata airbox is restrictive by its design to allow use of an inexpensive and flat paper filter. The AEM intake achieves better breathing by using a much higher flowing velocity stack conical filter placed directly in the flow of cool air in the "mouth" of the Miata. Not only will this intake give your Miata much freer breathing and quicker acceleration, but will also provide a nice deep growl at high revs. This is the same intake that MAZDA requires for the new Pro Spec racing series in the new Miata.

For more information: Good-Win Racing

(Added 2/26/06)


For active Miata owners who need serious seat protection, check out the very affordable Neoprene Seat Covers from Moss. Spills, mud, sand or whatever is easily repelled. Neoprene is a very comfortable fabric that insulates your body from heat or cold and it always has a cool, squishy feel to it. Quickly installed or removed for trouble free machine washing. Available in two tone combinations or solid colors, plus three colors in a popular Hawaiian pattern. Sold as a pair.

For more information: www.miatamania.com

(Added 2/26/06)


The Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube induction system that replaces the restrictive factory air filter and housing on your Miata. More airflow translates into an extra 3.7 horsepower at 6500 rpm! And the K&N filter is washable and reusable, and carries a million mile warranty.

For more information: www.miatamania.com

(Added 2/26/06)


Concerned about inattentive drivers behind you? Here’s a novel solution:

This little black box installs in minutes and makes your high center-mount brake light (the one in your trunk lid – or just above the trunk lid for NC owners) flash 3 times before staying solid. It’s a proven fact that people notice flashing lights more quickly than steady ones.

For more information: Thompson Automotive

(Added 2/26/06)


K&N 57i Series Induction Kits replaces your Miata’s restrictive stock air box with a large open-air style filter. The extra surface area provides more airflow and captures more dirt, increasing its service life before a cleaning is needed, up to 100,000 miles.

For more information: www.miatamania.com

(Added 2/26/06)


The Boss Frog "Straight Cat" is a great alternative to knocking the center out of your stock catalytic converter, or buying an expensive high-flow model. An unrestricted 2-1/2" stainless pipe is coupled with two heavy duty flanges that bolt right up to your exhaust in place of the stock cat.

For more information: www.miatamania.com

(Added 1/28/06)


Colored and smoked lens covers give your Miata a clean, fresh appearance. In addition to adding a great look, all pieces are cut from 16.5 mil, heavy-duty film to help withstand impacts. Film is designed so as not to affect the clarity of brake lights, fog lights, or headlights. May not be legal in all states.

For more information: www.miatamania.com

(Added 1/28/06)


It not common place for consumers to have their wishes come true but Miata.Net people are an uncommon and special bunch of folks.
You asked and R-Speed listened!

For your driving and viewing pleasure, the top rated Chaparral Wheels are now available in beautiful Champagne and GunMetal finishes.

For more information: R-Speed

(Added 1/8/06)


Specifically designed to bolt right up to existing holes, these Tow Hooks are SCCA legal for racing applications. These are the hooks the track officials use to clip the tow line to your Miata, to get it off the race course if it's disabled.

For more information: www.miatamania.com

(Added 1/8/06)


Fits all MX-5 Miata cars from 1989 - 2005 with OEM Vent Balls, this set of 4 vent chrome ball caps is very easy to install. Simply press them on and thats it!

A beautiful finishing touch for your interior.

For more information: I.L Motorsport

(Added 1/8/06)


Hot stuff from earlier years



[Home] - [FAQ] - [Search] - [Sponsors] - [Forums]
[Garage] - [Clubs] - [Contact Us] - [Disclosures] - [More...]
Copyright ©1994-2024, Eunos Communications LLC
All rights reserved.